حول Jonald Soberano:
Dear Sir,
As a highly skilled Mechanical Engineer, The beBee referred this Job Opportunity and I have highly interest for this Position. My Experience aligns well with the requirements you are seeking in particular role as a Mechanical Engineer .
With more than 10 years of Experience as a Mechanical Engineer I am proficient in equipment design in project management and customer coordination. Moreover while my on the JOB EXPERIENCE has afforded me a well-rounded skill set including first rate organizational and communications skills I excel at.:
- Completing submittal of Technical Project specification
- Completing submittal of Prequalification & Application Material Approval
- Preparation and execution of Testing and Commissioning Procedure
- Overseeing coordination of resources and maintaining Schedules.
- Recommending cost effective and sustainable Project materials.
- Review Building Construction and pipeline design(i.e DOCUMENTS DRAWING, P&ID, Tender, Isometric, Guide Drawing, GPP, SHOD DRAWING and AS-BUILT DRAWING.
- Prepare project BILL OF QUANTITIES Building Construction and Pipeline.
- HVAC design and calculations.
- Operation and maintenance in Building facilities
- Working in LEED project design.
In addition to my experience and personal qualities I have a solid Educational foundation and a passion for a mechanical design. I am extremely enthusiast about your company focus on outdoor & Indoor Equipment and would welcome the opportunity to contribute to your success by ensuring you have safe accurate design, operation & maintenance that meet and exceed customer expectations.
FACILITIES & MAINTENANCE, CONSTRUCTION BLDG., WATER SECTOR
تجربة
Working Experience:
- Position: Mechanical Engineer(4 YEARS-September 27,2017-Present)
: Procurement Engineer
Company: Al Rashid Trading & Contracting Company(RTCC
Address: AL MA ATHER ST. RIYADH, KSA
Project: 1.IPSO(INTEGRATED PUBLIC SECURITY OFFICE)
- Construction Building(September 2017-December, 2019)
2.SWCC(SALINE WATER CONVERSION CO.)
- Pipeline(January,2020-Present)
3. ARAMCO-EXPECT ARC
- Construction Building
DUTIES & RESPONSIBILITIES:
- Review Design Documents such as: P&ID, Isometric Drawing, Shop drawing, As-Built Drawing, Project Specification & etc, .
- Conduct site supervision, Testing & Commissioning and Installation
- Provide Daily Planning activity and distribute manpower to execute daily work and provide daily progress report.
- Coordinate to consultant and client with regard to project scope, Prequalification material approval(Long Lead Materials), AMA(SHORT LEAD MATERIALS)
- Brought out technical issue, non-conforming work, quality assurance and quality control of the project.
2.Position: Site Mechanical Engineer(5.5 YEARS-June 27,2011-November 15, 2016)
Company: Nesma Trading Company Ltd:
Address: THUWAL, JEDDAH KSA
Project: KAUST(KING ABDULLAH UNIVERSITY OF SCIENCE AND
TECHNOLOGY)UTILITIES
DUTIES & RESPONSIBILITIES:
- Responsible for Planning and scheduling maintenance work for MEP, mobile equipment machinery & Emergency Power Generator.
- Direct Supervises, Junior Engineer, Foreman’s, Technicians and Mechanics.
- Reports regularly to Maintenance Manager and bring up technical concerns, hold regular meeting to its staff to evaluate their activity, trace out problem and develop solution.
- Prepare inventory/purchase requisition on main parts and spare parts
- Testing and Commissioning for new equipment’s.
- Served as Permit Issuer and Permit receiver activity Cold work, Hot work and confined spaces.
3.Position: DUTY ENGINEER(1YEAR- JULY 10,2010-JUNE 20,2011)
Company: RCBC PLAZA MAKATI CITY
Agency: GAIC(GULF AGENCY INTERNATIONAL CO.)
Address: MAKATI CITY PHILIPINES
DUTIES & RESPONSIBILITIES:
- Directs & Supervises shift crews in repair and maintenance works for HVAC, FDAS, CIVIL,PLUMBING & ELECTROMECHANICAL ACTIVITY
- Testing commissioning for mechanical Equipment’s such as PUMPS, HVAC, POTABLE WATER PIPELINE, CHILLED WATER LINE, SMALL WTP.
- REVIEW Subcontractor Docs., PID, SHOP DRAWING and as-built
Drawing
- Conduct construction monitoring during tenant fit-out renovation of offices and building projects.
4.Position: Project Engineer(7MOS. November 5,2009-June 15,2010)
Company: F. GUREA CONSTRUCTION CO.
ADDRESS: ILOILO CITY
- Review construction design drawing such as Tender documents, IFC, SHOP DRAWING
- Testing and commissioning for mechanical equipments
- Conduct quality assurance and quality control for site activity.
- Update day to day activity construction progress and hold meeting for contractor, consultant and client.
SKILLS:
- Knowledgeable in Mechanical Equipment (Pumps, Surge Vessel, Reservoir tank, Piping, fittings, Valves, Air Compressor and etc.) Plumbing, Electrical, Fire Fighting and HVAC Inspect, Repair, Installation and Commissioning.
- Able to Analyse Pipeline components and design
- Experience in an engineering, procurement and operations
- Effective verbal and written communication skills
- Proficiency with personal computers and networking, MS OFFICE.
- Ability to analyse bills of material and drawings to understand key requirements
- Liaison to client, Consultants, suppliers and equipment manufacturer.
- Ability to identify cost reduction opportunities
- Engine Workshop Experience
- Leadership, Teamwork.
- Knowledgeable in AutoCAD
- Knowledgeable in Computer Aided Design of Air Conditioning System (HVAC), for LOAD Calculation using;
- CHVAC by Elite Software Development Corp.
- HAP ver. 4.10 (Hourly Analysis Program) by Carrier Air Conditioning Co.
- CHVAC by Elite Software Development Corp.
- HAP ver. 4.10 (Hourly Analysis Program) by Carrier Air Conditioning Co.
- MANUAL Calculation using procedures established by the American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE, INC.)
- Computer Aided Design of Piping and Pump System and Ducting using Carrier’s E20 Programs.
- Manual Calculation and using Ductulator.
- Manual Drafting.
- MS Office, Excel, Power point
- Management/Supervisory Experience
Achievements, Licensure, Certificate:
- Licence Mechanical Engineer(RME)- Lic. No.0072377---Philippines
- Member Philippine Society of Mechanical Engineer (PSME)-NO. 84368
- Member Saudi Council of Engineers- No:365478----KSA
- CHVAC(Computer Heating Ventilating and Air Conditioning) CERTIFICATE---Philippines
Seminars/Training:
- KAUST (King Abdullah University of Science and Technology) Certified Working Permit Issuer and Receiver(ARAMCO Project)
- SOS (scheduled Oil Sampling) Fluid Analysis Training held Zahid Tractor Training Centre.-CATERPILLAR
- OHSAS 18001:2007 OVERVIEW AND AWARENESS held at KAUST Jeddah, KSA
- INTRODUCTION TO ELECTRICAL SAFETY held at KAUST Jeddah KSA
- On “SAFETY in a CONFINED SPACED”
- IUMS(Integrated Utilities Monitoring System) held at KAUST KSA
- Product Presentation of “AIR TECHNOLOGY PNEUMATICS”-KSA
- Fire Safety, Basic Fire Fighting Rescue-KSA
- Basic Elevator Rescue Operation-PHILIPPINES
- CHVAC Training/Seminar-PHILIPPINES
التعليم
Educational Background:
Tertiary School: Western Institute Technology (WIT) Luna St., Lapaz Iloilo City
- B.S. MECHANICAL ENGINEERING----Year Graduated March 2009
- Registered Mechanical Engineer (RME)----Graduated October 2009
High School: Libungan National High School Cotabato City---PHILIPPINES
Primary School: Baluarte Elementary School-ILOILO CITY---PHILIPPINES
محترفون من قطاعات مختلفة بالقرب من Riyadh, منطقة الرياض
وظائف بالقرب من Riyadh, منطقة الرياض
-
GIS Director
تم العثور عليها في: DrJobEN SA A2 - منذ 5 أيام
Soudah Development Riyadh, المملكة العربية السعوديةDevelop and implement a strategic vision for GIS technology and data management aligned with organizational goals. · Identify opportunities for leveraging GIS to improve operations and decision-making. · Lead the development, customization, and maintenance of GIS applications and ...
-
مدرس موسيقى
تم العثور عليها في: DrJobAR SA A2 - منذ 5 أيام
HirePlans الرياض, المملكة العربية السعوديةإقامة مجانيةرحلات العودة السنويةتأمين صحيتأشيرة للموظفمكافأة نهاية الخدمة عند إتمام العقد.- إجازة سنوية مدتها 6 أسابيع بالإضافة إلى العطلات الرسمية والدينية. ...
-
Supply Chain Manager
تم العثور عليها في: Talent SA A C2 - منذ 5 أيام
Lucy Electric Riyadh, المملكة العربية السعوديةManagement of material planningactivities aligned to SOP Targets. · MonitorMaterials Requirement Planning (MRP) process in conjunction withSOP. · Ensure master data sanctity from InventoryManagement point of view. · Active participationin SOP finalization by providing quality inf ...