asif abdullah

If you are looking for a dedicated and productive member for your Quality Control team, I am a self-motivated individual and believe I would be a valuable contribution for the right position. I have to Fifteen plus years’ experience in Oil & Gas fields

• Review of GA Drawings.
• Reviewing/Preparation of MRIR as per site requirements after material receiving inspection.
• Reviewing MTC   for material grade, dimensions, mechanical properties & chemical composition for pipes, fittings and filler material, electrodes etc.
• Review of pipeline PQR/WPS, Procedures etc.
• Visual and Dimensional Inspection of material receiving.
• Review of MTC as per Standard and Drawing requirements.
• Joint Fit-up & Welding Inspection of Piping.
• Review calibration certificates of instruments and equipment’s used during Welding activity and during inspection like pyrometer, welding machines, baking ovens, holding ovens.
• Witness welds preparations accordance with WPS and drawing.
• Verification of welder qualification as per WPS.
• Welding   consumable  storage /control   and backing   requirement as specified in QC procedure.
• Witness Joint fit­-ups In accordance with WPS /drawing tack weld are to good workmanship standard   and to code standard.
• Witness welding pre heat   requirement as per WPS.
• Witness and monitored welding parameters as per WPS like current, volt, and travel speed.
• Witness of visual inspection after completion of welding and prepare report for the acceptance/rejection of weld.
• Verification of welder identification on the joint.
• Review of NDT (RT, MPI &LPT) as per specification.
• After weld checking for delay cracking.

• WORK EXPERIENCE :   15 Years( From Mar, 04 2006 to till date)

• EXPERIENCE IN SAUDI ARABIA

1. ARABIAN DEAVY DELIVERY AT YANBU NORTH TERMINAL (YCOT) (through Abdullah Faleh Al-Dossary & Sons Co.)

POSITION:                    QC INSPECTOR (WELDING)

FROM:                           12/08/2019 TO TILL DATE.

PROJECT:                     LPG OLEFINS SATURATION UNIT (YASREF).

1. YANBU ARAMCO SINOPEC REFINING (OFF SHORE) (through Abdullah Faleh Al-Dossary & Sons Co.)

POSITION:                    QC INSPECTOR (WELDING)

FROM:                           10/02/2018 TO 10/08/2019

PROJECT:                     LPG OLEFINS SATURATION UNIT (YASREF).

3.  YANPET SABIC SHUTDOWN (through Abdullah Faleh Al-Dossary & Sons Co.)

POSITION:                    QC INSPECTOR (WELDING / PIPING)

FROM:                           13/12/2007 TO 09/02/2018 

     PROJECT:                     SHUTDOWN

4. Rehabilitation of Yanbu south Terminal (through Abdullah Faleh Al-Dossary & Sons Co.)

POSITION:                    QC INSPECTOR (WELDING)

FROM:                           10/11/2016 TO 13/12/2017 

PROJECT:                     REHABILITATION OF YANBU SOUTH TERMINAL

5. CONTRACTING AND CONSTRUCTION ENTERPRISES (CCE) SADARA PROJECT JUBAIL KSA.

POSITION:                    QC INSPECTOR (WELDING)

FROM:                           25/10/2013 TO 10/04/2016

PROJECT:                     SADARA PETROCHEMICAL COMPANY PROJECT JUBAIL KSA.

• EXPERIENCE IN PAKISTAN.

5.  PRESSON DESCON INTERNATIONAL LIMITED (PDIL).

POSITION:                    Sr. QA/QC INSPECTOR (WELDING & PIPING)

PROJECT:                     MOL PAKISTAN CPF MAKORI OIL & GAS FIELD.

FROM:                           05/01/2013 TO 21/10/2013

6.  IKAN ENGINEERING (PVT) LTD.

POSITION:                    QA/QC INSPECTOR (TANK).

PROJECT:                     MOL PAKISTAN CPF MAKORI OIL & GAS FIELD.

     FROM:                     16/03/2010 TO 04/01/2013

7.  MATRIX ENGINEERING (PVT) LTD.

POSITION:                    QC INSPECTOR (PRESSURE VESSEL).

PROJECT:                     HYDROGEN PEROXIDE (DESCON CHEMICAL)

FROM:                     15/09/2009 TO 01/03/2010

            8.   DDFC (PVT) LTD LAHORE.

POSITION:                    QC INSPECTOR (PRESSURE VESSEL).

PROJECT:                     AADHI GAS FIELD DEVELOPMENT PHASE II 

FROM:                     04/03/2006 TO 10/08/2009