QA/QC Mechanical Engineer at Shapoorji Pallonji Mideast. July 2019 to Present|KAFD High rise buildings (CLJ03-Parcel 1.09, 1.10, 1.11, 1.14, 1.15), (B+G+F=70) (O&M) Riyadh, Saudi Arabia Responsibilities: - - Primary inspection responsibilities are monitoring, supervising, and appraising the Sub-contractor construction and repair performances in quality control including evaluation of materials and procedures in accordance with applicable project specifications.
- Review the shop drawings, method statements, material submittals.
- Monitor the progress of the site activities and make sure that all the construction works are carried out as per design/shop drawings and project specifications.
- Review quality inspection personnel qualifications and training requirements.
- Monitor the disposition of all issued non-conformance reports.
- Monitor the progress and effectiveness of the project quality management system. Recommend and implement improvements when required.
- Coordinate all quality related correspondence with the customers representatives.
- Attend client quality management meetings.
- The preparation and control of project quality system management documentation prior to project commencement.
- Monitor statistical method reporting.
- Control all achieve documentation upon the completion of the project.
- Observe the safety procedures followed by the contractor.
- Discuss the observations with the contractor as necessary to correct safety violations.
- Assist in the final inspection and handover of the work. Review the adequacy and accuracy of the defect lists.
- Attend independently the T&C of all utility networks and buildings.
- Checks all project drawings, documentation, calculations, technical evaluations and manpower estimates to ensure accuracy and completeness.
- Represent the organization and enhance relationships in dealings with client, consultants and regulatory authorities to ensure all agreements are implemented.
- Prepare, develop and maintain up to date quality procedures, documents and method of statement given to client/main contractor.
- Organize above/underground piping site activities including painting, wrapping, coating, fabrication, welding, erection.
- Review and coordinate work to provide instruction and guidance on technical issues in accordance with the project requirements.
- Provide technical reports and assist and preparing management reports.
- Identifies delays at site and notifies the Project Engineer.
- Assist senior management team in preparing sub contract agreements and in recruiting people of various disciplines.
- Undertake team briefings and inception activities to ensure all aspects of work are understood by all concerned parties.
- Attend regular meetings with clients, architects and consultants and update all parties on project progress.
- Plan and coordinate all on-site MEP activities to comply with applicable owner contract documents, engineer and government specifications, requirements and codes.
- Where required prepare technical clarifications to the tendered design to suit specific on-site construction and coordination issues.
- Review of associated quality control documentation to ensure that equipment and materials are manufactured in accordance with applicable codes, client and project specifications and standards.
- Analyze specifications and manuals and provide technical information to implement operating procedures, clarify ambiguities and solve problems.
- Inspect all permanent works for spec/ drawings compliance. Check dimensions and levels/ profile.
Mechanical Inspector at Louis Berger & Hill Intl JV. May 2015 to June 2019| Riyadh Metro Project Saudi Arabia Responsibilities: - - Carry out regular site inspections record changes on site and review as-built drawings/ submissions and maintain all record in excel sheet, Review and verify As-Built drawings.
- Monitors construction contractors’ mechanical installation and testing activities, including, but not limited to piping, leak tests, duct work & insulation, pumps, building management system, HVAC controls, domestic water systems, foundation, de-watering systems, firefighting system etc.
- Review and monitor contractor’s shop drawings, materials, and method statements Contractor’s procedures.
- Monitor all quality related activities on the project, Assist the Resident Engineer in the supervision for MEP works.
- Review project documents that include, methodology, quality assurance, control procedures, engineering and construction time schedule.
- Review and provide necessary comments on Contractor’s technical submittals such as design, specifications, drawings, calculations, method statements, TPIs, risk assessment etc. for compliance with Employer’s requirements, Authority requirements, End-user requirements, Local and International Standards Oversee/inspect site construction work in daily basis, witness tests, identify non-compliance to construction documentation, and recommend corrective measures.
- Provide assistance to the Resident Engineer with prompt exchange of correspondence, submittals, NCR’s and RFI's to all relevant parties.
- Coordinate on a daily basis with the Team Leader and other team members to verify, document and report the quality issues of work performed by the Contractor and provide/suggest corrective actions.
- Assists Contractor with coordination of other related trades (i.e., plumbing, fire protection, site drainage, MEP, testing & commissioning etc.
- Review contractor’s mechanical shop drawing in conjunction with the structural and electrical engineers to ensure engineering coordination and advise the Project Director accordingly.
- Process (review and comment) the incoming correspondence.
- Monitor progress, record, and identify risks and potential delays and provide/suggest solutions.
- Prepare weekly and monthly progress reports with details of the observed works, quality, progress (fabrication and construction), testing of components, status of materials procurement/delivered to site.
- Monitor all quality related activities on the project.
- Perform all internal and external audits on behalf of the company management
- Verify contractor quality requirements are specified to vendors and contractor documentation submittals.
- Assessment of the Contractor’s compliance to the quality management system as specified in the latest applicable standards. Any non-conformity found shall also be reported.
- Review Shop drawings, Workflows, Method statement, ITP and quality of all materials at site.
- Submit daily report on site activities as directed by the Resident Engineer.
- Monitor contractor’s progress on site, site Inspections and supervisions/ practices for health and safety.
- Cary out inspection and checking for all quality related procedures in the site and ensures activity at the site are as per approved method statement and inspection test plan.
Mechanical Engineer at Larsen & Toubro Co. Ltd. May 2013 to April 2015|Metro Projects Faridabad, India Responsibilities: - - Site monitoring and surveillance of subcontractor/supplier against detailed schedules for compliance with defined standards and specification.
- Preparation of Equipment/ Material approval requests and follow up on approvals with client.
- Preparation of Inspection and Test Plan, Construction Quality Procedure and Method of Statement.
- Implement ITP, Approved MS, and Checklist etc. Maintain record of Inspection requests.
- Review and Inspection of all Material as per specification and raise inspections for approval prior to Installation • Conduct on/off site inspections for work carried out or materials received and verification of associated submittals and preparation for client submittals
- Supervise and remain vigilant regarding all aspects of the construction activities. Respond with appropriate and necessary levels of construction supervision to provide quality assurance in accordance with Contract Documents.
- Perform internal audits to assess compliance to Standards and to the internal Quality System, Including investigation, presentation of observations and findings, and reporting
- Develop method statement for the activity including risk assessment and job safety environmental analysis and Inspection Test Plan and Checklist based on specifications of the project.
- Before consultant inspection, conducting internal inspections for MEP works and reporting to concern project engineers for rectification of works.
- Cary out inspection and checking for all quality related procedures in the site and ensures activity at site are as per approved method statement and inspection test plan.
- Responsible for planning, design review and implementation of MEP services in coordination with the civil team. Prepare and conduct piping hydro testing works as per QC requirements.
- Execution & Installation of HVAC, firefighting, lifts, plumbing & piping system and all services related activities at the construction site.
- Site instruction/observations, permanent materials delivered and other QA/QC documents. Responsible for closure of Non-conformance, NCR and Site Instruction, SI.
- Undertake general project site observation/inspection of the mechanical services works for Contractor’s adherence to the approved shop drawings and Consultant’s specification, good working practices, and construction schedule.
- Taking care of QA/QC documents of the entire project including certificates, calibration, test results, inspection requests, non-compliance reports.
- Maintain an ongoing list of mechanical services defects for the contractor’s remedial action.
- Undertake final project snagging and prepare a list of defects for the Contractor’s action.
- Perform all daily inspection and test of the scope and character necessary to achieve the quality of construction required in the drawings and specifications for all works.
- Inspection and meeting about quality problems including the closure of Non-Compliance Report.
- Ensure all materials are correctly stored at site and installed without damage.
- Follows and maintain Company standards of Quality in accordance with Company Quality System requirements.
- Prepare draft site/engineer’s instructions, relating to the building mechanical services, as required and issue to the Project Manager.
- Prepare, develop and maintain up to date quality procedures, documents and method of statement given to client/main contractor.
- Serve as the site person responsible for coordinating the daily site construction works.
Mechanical Engineer at JMC Projects Limited July 2010 to April 2013| Palm Hills Garden (B+G+F=12) Gurgaon, India Responsibilities: - - Supervise field inspection activities of site construction, Mechanical works, pressure testing and prepare daily inspection reports.
- Controls equipment installation, alignment, and leveling, identify quality problems or areas for improvement and recommend solutions, Maintain project material certification.
- Prepare inspection reports and issue non-conformance reports as required.
- Other responsibilities are supported to commissioning of plant and equipment utilities, preventive maintenance, condition monitoring, failure analysis, and handover of documents assist in the implementation of safety and environmental protection programs and provides data required on project progress.
- Reviews contractors’ mechanical quality assurance and quality control programs, inspection and test plans, installation, testing, and as-built procedures, for all mechanical engineering systems and comments for transmittal to the contractors.
- Arrange meetings between the contractor and concerned departments to resolve interfacing problems during construction.
- Organizes, coordinates, and conducts in conjunction with the concerned department's acceptance inspections and re-inspections of the completed permanent works until all deficiencies are corrected and signed off.
- Submit monthly report to manager related work rejection rate, material reaction, non-conformance report.
- Attend project, site progress, and any mechanical services-related technical meetings as directed by the project manager.
- Prepared Inspection Test Plan (ITP), Check List and Test Report etc., Control on MAR and MIR process, Monitor IR s/NCRs/CAR and take actions, Participate in Company Audits.
- Follow up with Engineers Supervises and check completion work and timely raise inspections and coordinate with consultant for approval.
- Participate in project construction meetings if required, assist in resolution of construction problems, Analyze value engineering proposals, Coordinate with other team members.
- Witness on-site piped system pressure test, air conditioning duct leakage testing, Witness mechanical system final testing and commissioning.
- Maintains records of the changes to the working drawings to enable the record drawings to be produced.
- Manages the system testing and commissioning.
- Co-ordinate with the main contractor and other sub-contractors at site.
- Set targets and monitors the productivity of the workforce at site.
- Arrange skills development and training for the foremen and site workforce.
- Monitors the production and quality of sub-contractors works at site.
- Submit and Follow up Material Approval from consultant.
|
